Care Tips

A few simple things will keep your box looking and working like new for years.

Keep it cool. Heat is the one thing that can warp a 3D-printed box. Keep it out of hot cars, off sunny windowsills, and away from stoves and heaters.

Clean it gently. Wipe with a soft, damp cloth and a little mild soap. For a deeper clean, 70% isopropyl alcohol on a cloth is safe. Skip the dishwasher and don't let it soak — heat and standing water aren't kind to it.

Open the latch with an easy hand. It's built to hold securely, not to be forced. A gentle open and close is all it needs.

Mind the finish. Wipe with a soft cloth. Avoid abrasive scrubbers and harsh solvents so the finish stays clean and even.

Fridge and freezer safe. Cold doesn't bother your box — the fridge and freezer are both fine. The one thing to know: let it return to room temperature before you wipe it down, since a cold surface pulls condensation and you'll just be chasing moisture around.

Each box is 3D-printed, meaning slight variations in texture, finish, or color may occur. This is a normal part of the 3D printing process.